本設計以PLC結合觸摸屏為控制核心,電氣控制柜一臺。剪切線由引入棍,矯直機,矯直機升降器,圓盤剪,卷取機組成。This design is mainly controlled by PLC with this touch screen. The components are ...(專業(yè)的那些名稱我不會= =0)各臺交流電機由歐姆龍變頻器控制調速,直流電機由歐陸直流調速器調速。生產線運行速度通過觸摸屏設定,變頻器的運行頻率、電流及所有設備的運行狀態(tài)均可在觸摸屏顯示。The speed is controlled by OMRON inverter on each alternating current motor when the DC motor are controlled by EUROTHERM DC TIMING. The running speed of the production line can be set by the touch screen, and the inverter frequency, electrical current and the running states of every equipment will be showed in the screen.你這個也是木工機械?我除了四面刨和雙端銑其他的都不會,呵呵。我們也有用PLC,也有PRODUCTION LINE。。。